Call us at 732 292-1994 or 800 867-6690   |  Email us at triadscientific@gmail.com  |  Visite us on

facebook

Nabertherm Chamber Ovens Electrically Heated or Gas-Fired NEW

Mechanical Convection >> Nabertherm Chamber Ovens Electrically Heated or Gas-Fired NEW

Nabertherm Chamber Ovens Electrically Heated or Gas-Fired NEW

 

"The chamber ovens of the KTR range can be used for complex drying processes and heat treatment of charges to an application temperature of 260 °C. The high-performance air circulation enables optimum temperature uniformity throughout the work space. A wide range of accessories allow the chamber ovens to be modified to meet specific process requirements. The design for the heat treatment of flammable materials in conformance with EN 1539 (NFPA 86) is available for all sizes." (Nabertherm)

 

Tmax 260  °C

Electrically heated (via a heating register with integrated chrome steel heating elements) or gas-fired (direct or indirect gas-fired including injection of the hot air into the intake duct)

Temperature uniformity up to +/- 3  °C according to DIN 17052-1 (for design wihout track cutouts)

High-quality mineral wool insulation provides for outer temperatures of < 25  °C above room temperature

High air exchange for fast drying processes

Double-wing door for furnaces KTR 3100 and larger

Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load

Incl. floor insulation

Defined application within the constraints of the operating instructions

NTLog Basic for Nabertherm Controller: Recording of process data with USB-flash drive

 

Additional equipment:

  • Track cutouts for level drive-in of charging cart
  • Base frame to charge the oven via a charging forklift
  • Additional Door in the back for charging from both sides or to use the oven as lock between two rooms
  • Fan system for faster cooling with manual or motor-driven control of the exhaust flaps
  • Programmed opening and closing of exhaust air flaps
  • Air circulation with speed control, recommendable for processes with light or sensitive charge
  • Observation window and furnace chamber lighting
  • Safety technology according to EN 1539 (NFPA 86) (models KTR .. LS) for charges containing solvents
  • Charging cart with or without rack system
  • Design for clean room heat treatment processes
  • Rotating systems for tempering processes
  • Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control

Accessories:

  • Adjustable plate shutters to adapt the air guide to the charge and improve temperature uniformity
  • Guide-in tracks and shelves
  • Shelves with 2/3 extraction with evenly distributed load on the whole shelve surface
  • Platform cart in combination with drive-in tracks
  • Charging cart with rack system in combination with drive-in tracks
  • Sealing shoes for ovens with drive-in tracks to improve temperature uniformity in the work space

 

ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmHeatingElectrical
     power in kW1 
 °Cwdhin lWDHKTR/KTR ..LSconnection*
KTR 1000 (LS) 260 1000 1000 1000 1000 1900 1430 1815 18/on request 3-phase
KTR 1500 (LS) 260 1000 1000 1500 1500 1900 1430 2315 18/36 3-phase
KTR 3100 (LS) 260 1250 1250 2000 3100 2150 1680 2905 27/45 3-phase
KTR 4500 (LS) 260 1500 1500 2000 4500 2400 1930 2905 45/54 3-phase
KTR 6125 (LS) 260 1750 1750 2000 6125 2650 2200 3000 45/63 3-phase
KTR 6250 (LS) 260 1250 2500 2000 6250 2150 3360 3000 54/on request 3-phase
KTR 8000 (LS) 260 2000 2000 2000 8000 2900 2450 3000 54/81 3-phase
KTR 9000 (LS) 260 1500 3000 2000 9000 2400 3870 3000 72/on request 3-phase
KTR 12300 (LS) 260 1750 3500 2000 12300 2650 4400 3000 90/on request 3-phase
KTR 16000 (LS) 260 2000 4000 2000 16000 2900 4900 3000 108/on request 3-phase
KTR 21300 (LS) 260 2650 3550 2300 21300 3800 4300 2500 108/on request 3-phase
KTR 22500 (LS) 260 2000 4500 2500 22500 2900 5400 3500 108/on request 3-phase

DESPATCH LCC OVEN DESPATCH LCC1-51V-3

Across CF1200.16.12.12 Preowned Across CF1200.16.12.12 Series CF1200 Muffle Furnace

BAXTER DK-63 Oven SCIENTIFIC PRODUCTS DK-63 Large Tabletop Oven used OVEN

Binder 015-04-350-4 Binder FD115 Door

BINDER FD 23 (version FD023UL-120V) Binder FD23 Binder FD-23 used

Binder Model FP115 Oven Forced Air Binder FP115 Mechanical Convection Oven Binder FP-115

Despatch LBB2-27-1 Oven Despatch OVEN DESPATCH Mechanical Convestion Oven Large DESPATCH LBB Series used very nice

DESPATCH OVEN DESPATCH LCC2-14V-3 Large oven System Despatch Oven

Fisher 13-247-725F Fisher 725F Fisher Scientific 725F Oven Fisher Scientific Model 725F Oven used nice Oven

Fisher 750F Isotemp Oven Fisher Isotemp Oven Fisher Oven Fisher Scientific Oven 750F used nice

GLASSWARE DRYING OVEN big capacity new New Drying Ovens large New Phramaceutical Drying Oven Large Bulk Drying Oven

GRIEVE Grieve CLA-500 CLASS 100 Oven 1 used

Heraeus UT6200 Oven Heraeus UT-6200 Oven Hereaus Oven Used laboratory oven with forced convection from Heraeus, type UT6200 used very nice

Hotpack Safety Oven Hotpack MODEL 212530-17 Hotpack 212530 Oven is absolutely beautiful,used nice condition

Hotpack Safety Oven Hotpack MODEL 212530-17 Hotpack 212530 Oven is absolutely beautiful,used nice condition

Lab-line 3488M Imperial V Digiatal Mechanical Convection Oven Labline 3488M Oven Lab-line Oven Digit

Lancer 1600 UP LABSEC 16 1600UP Glassware Dryer Oven Lancer Glassware Drying Oven Lancer LABSEC 1600UP Glassware Dryer Oven Lancer Glassware Drying OvenLancer Labsec 16 1600UP Glassware Dryer Only

Mint VWR Model 1690 VWR 1690 Two Door Oven Vwr 1690 Horizontal Air Flow Lab Oven used very nice ready to go tested and 90 day depot warranty

Nabertherm Air Circulation Chamber Furnaces, Electrically Heated Also for Debinding in Air and under Protective Gases NEW

Nabertherm Chamber Ovens Electrically Heated or Gas-Fired NEW

Nabertherm Ovens, also with Safety Technology According to EN 1539 Electrically Heated NEW

PRECISION SCIENTIFIC STM-80 Mechanical Convection Oven PRECISION STM-80 Oven Thermo Precision Oven STM-80 used nice

SHEL LAB HF10-2 High Performance Ovens used beautiful

Techne Hybrigene Techne Hybridizer HB-1D Techne HB-1D Hybridization Incubator Techne HB1D Techne Hybridization Incubator Techne Hybrigene Hybridization Oven used

Thermo Heratherm OMH400 Oven Thermo OMH400 Oven Thermo Stainless Steel Oven appears barely if ever used at all

Thermo Precision Scientific STM 80 Oven Precision

Thermo Scientific 625 Oven Precision 625 Oven Precision Scientific 51221-139 Thermo Scientific 51221-139 Thermo 625 Oven Precsion Scientific Freas Oven 625 Model used Nice

THERMOLYNE OV47525 BARNSTEAD OV47525 Lab Oven Thermo Mechanical Convection Oven used system nice LOOKS LIKE NEVER USED

VWR 1330FM Horizontal Airflow OvenVWR 1330 FM Forced Air Oven USED REFURBISHED VERY NICE

VWR 1602 Signature High-Performance Horizontal Air Flow Cleanroom Ovens VWR 1602 VWR 52201-710 HAFO 1600 SERIES HAFO OVEN used nice

VWR 1602 Signature High-Performance Horizontal Air Flow Cleanroom Ovens VWR 1602 VWR 52201-710 HAFO 1600 SERIES HAFO OVEN used nice

VWR 1670 High-Performance Horizontal Air Flow Ovens, used, nice 20 x 20 x 19 inch high chamber temp range Model 1670 Series 1600 HAFO

VWR 1675 Oven used

VWR 1685 High-Performance Horizontal Air Flow Oven VWR MODEL1685 High-Performance Horizontal Air Flow Oven used

VWR Symphony 414004-568 VWR 414004-568 Forced Air Oven; 155 L (5.4 cuft); 120V/60Hz used nice oven

Yamato Constant Temperature Ovens DNE400/410/600/610/810/910 Operating Temp. Range RT +5°C to 210°C, Temp. uniformity ±2.0°C NEW

Yamato Constant Temperature Ovens DNF400/410/600/610/810/910 Operating Temp. Range RT +10°C to 260°C, Temp. uniformity ±2.5°C NEW

YAMATO DKN810 Forced Air Circulation Oven YAMATO DKN-810 like YAMATO DKN-800 YAMATO OVEN Yamato DKN SERIES OVENS

Yamato DKN912C Mechanical Convection Ovens Yamato Mechanical Convection Oven 18.9 Cubic Ft. used and new

Yamato DN93 BIG Mechanical Convection Oven Oven used nice compare to YAMATO DNE-911 OVEN new

Yamato Fine Ovens DF410/610 & DH411/611 NEW

Yamato Fine Ovens Yamato DF811 Yamato 1011 Yamato DH811 Yamato 1011 NEW

Yamato Inert Gas Ovens /DN series Yamato DN410lE Yamato 610lE NEW

Yamato Mechanical Convection Ovens Yamato DKN series Yamato DKN402C/412C Yamato DKN602C/612C DKN812C Yamato DKN912C NEW

WHY YOU SHOULD CHOOSE TO DO BUSINESS WITH TRIAD SCIENTIFIC

1. EXPERIENCED-We have been building labs, equipping labs, and supplying lab equipment parts and service for over 20 years. With over 100 years of combined lab equipment experience at our site and working with many experienced technicians, we try to offer the right equipment at the right price for you, our partner.

2. SAVE MONEY- We sell, lease, and rent - You save money, 5-70% off original retail, so you get great equipment at a great price.

3. WARRANTY -We offer a warranty on our refurbished equipment and new manufacturer warranty on new equipment.

4. SERVICE- We offer instrument service, refurbishment validations, and calibrations at great rates and skill levels.

5. INSTRUMENT PARTS- We sell new instrument parts and new equipment parts and hard to find used older parts

6. UNIQUE- We are an independent dealer and also sell used instruments, such as AA, FTIR, GC, GC/MS, HPLC, LC/MS, ICP, ICP/MS, Particle Size Analysis, UV/VIS, and UV/VIS/NIR. This equipment is manufactured by companies like Agilent, Hewlett Packard, Waters, Hitachi, Perkin Elmer, Shimadzu, Beckman, and more. WE ARE NOT AFFILIATED WITH THESE COMPANIES IN ANY WAY!

7. BUILD LABS- We well discounted made in USA Lab Casework, Fume hoods, Blowers, Safety Cabinets, and Clean Benches.

8. CASH PAID-Top dollar paid, and you can sell your excess, obsolete, surplus equipment with us. We can buy it or sell on consignment.

9. DIVERSIFIED-We sell a very broad line of new and used Lab Equipment. See our detailed listing above.

CLICHERto join TRIAD SCIENTIFIC'S NEW MAILING LIST and GET SPECIAL LIMITED TIME OFFERS !!!