Welded Blades and Shafts

Crossed blade, straight blade, pivoting blade, collapsible blade, square blade, pitched blade propeller, anchors and PTFE impellers (collapsible, anchor, propeller).

Description: Electro-polished stainless steel 316L Welded to shaft Weight 0.3 lbs (128 g) Very high shear with high vortexing characteristics Will vortex 5 gallons of water at 900 rpm Applications: High speed Low viscosity mixing Radial flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: A131 0.3 lbs (128 g) High shear with moderate vortexing characteristics Will vortex 5 gallons of water at 1200 rpm Applications: High speed Low viscosity mixing Radial flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: A231 0.3 lbs (120 g) High shear with moderate vortexing characteristics Applications: High speed Low viscosity mixing Radial flow pattern Specifications:

Description: Electro-polished stainless steel 316L Pinned to shaft Weight: 0.3 lbs (126 g) Moderate shear with moderate vortexing characteristics Will vortex 5 gallons of water at 800 rpm Applications: High speed Low viscosity mixing Radial flow pattern Specifications:

Description: Electro-polished stainless steel 316L Pinned to shaft Weight: 0.3 lbs (127 g) High shear for mixing in carboys or narrow neck flasks Collapsed blades enter any opening over 10 mm diameter Will vortex 5 gallons of water at 1000 rpm Applications: High speed Low viscosity mixing Radial flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: A150 0.4 lbs (180 g) For small volumes of viscous product Applications: Low speed High viscosity mixing Tangential flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: A250 0.3 lbs (159 g) For small volumes of viscous product Applications: Low speed High viscosity mixing Tangential flow pattern Specifications:

Description: This product replaces Pitched Blade Propeller Model A160. Electro-polished stainless steel 316L Secured to shaft with set screws Weight: 0.4 lbs (181 g) Low shear, high top-to-bottom (axial) pumping capacity with high gas injection Will vortex 5 gallons of water at 3600 rpm Applications: High speed Low to medium viscosity mixing Axial flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: 0.4 lbs (181 g) High shear at edges, can be used close to vessel wall Sometimes referred to as a "sweep" Applications: Low speed High viscosity mixing Tangential flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: 0.6 lbs (280 g) High shear at edges, can be used close to vessel wall Sometimes referred to as a "sweep" Applications: Low speed High viscosity mixing Tangential flow pattern Specifications:

Description: Viscous product mixing U044 Anchor Paddle with 2 Sweep accessories Fits a 4 liter beaker For use with BDC1850 or BDC3030 stirrer Viscosity range 0-38,000 Centipoise Temperature range up to 100° Celsius (212° Fahrenheit) *Also sold as a pack of 6 Sweep accessories Model SW4 Operating Instructions Product information Applications: Low speed High viscosity mixing Tangential flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: 0.7 lbs (300 g) High shear at edges, can be used close to vessel wall Sometimes referred to as a "sweep" Applications: Low speed High viscosity mixing Tangential flow pattern Specifications:

Description: Electro-polished stainless steel 316L Welded to shaft Weight: 1.6 lbs (716 g) High shear at edges, can be used close to vessel wall Sometimes referred to as a "sweep" Use only with overhead stirrer BDC1850 Applications: Low speed High viscosity mixing Tangential flow pattern Specifications: