Call us at 732 292-1994 or 800 867-6690   |  Email us at triadscientific@gmail.com  |  Visite us on

facebook

inspeXio SMX-100CT
Micro Focus X-Ray CT System

New Possibilities, Pioneered by inspeXio
A Solution That Gives Rise to User Friendliness and Beauty

The inspeXio SMX-100CT is a CT system capable of performing high-magnification 3D observations of resins, medicines, bones, and other soft materials. It is equipped with a sealed tube type microfocus X-ray generator with a maximum output of 100 kV, and a high-sensitivity image intensifier.
The interface provided is capable of easily observing the internal 3D structure of samples. Furthermore, clear, high-magnification CT images are obtained faster and more clearly thanks to the high-performance computing system HPC inspeXio.

Basic System to Achieve High Performance

System Structure and Basic Principles

The measurement target (sample) is positioned between the X-ray generator and the X-ray detector, as shown in the figure below.
X-ray fluoroscopic data is collected from every angle by rotating the sample 360 degrees, and computed tomographic images (CT images) are calculated.

MPR Display
(Arbitrary cross sectional display)

Stands for Multi Planar Reconstruction.
Multiple CT images are stacked in a virtual space, and four images — a CT image, mutually orthogonal longitudinal section images, and an arbitrary section image orthogonal to the longitudinal section images — are arranged for display.

VR Display
Stands for Volume Rendering.
Multiple CT images are stacked in a virtual space, and rendered in three dimensions.

User Interface

Main unit, operation box, and software design has been integrated to enable intuitive operation.

Easy Sample Positioning Through Intuitive Operations

Intuitive Operations via Observation Camera

High-Performance Computing System HPC inspeXio

A system employing the latest High-Performance Computing (HPC) technology has been incorporated.
As a result, computational processing is approximately 80 to 170 times faster than before.

CT Scan Area 3D Display Function

The CT scan area is overlaid on the MPR image in real time to match the movement of the CT stage.

Based on the CT scan results, a CT scan of the region of interest can be performed at even higher magnification.

A Variety of Original Functions to Support the User

CR Scan

To obtain fluoroscopic images with no distortion in the vertical axis direction, data is only collected from the centerline of the X-ray detector while the sample is moved vertically.

Real-Time Sensitivity Correction

This enables obtaining sharp X-ray fluoroscopic images free of shading (uneven brightness).

DICOM Conversion Function

This enables converting obtained CT image data to the DICOM format, the world standard for medical imaging.
This function is essential for analyses with medical imaging analysis software.
* Operation with all DICOM compatible software is not guaranteed.
* CT image brightness is displayed in 16-bit grayscale, and does not conform to Hounsfield units.
A conversion function is provided for CT image brightness values via manual input.

Enhanced Noise Reduction Function

In comparison with conventional processing, noise is reduced while keeping the shape of longitudinal sections intact.

Software Limit Function

The software limit function, which can be configured to suit the sample size, helps prevent collisions between the X-ray generator and sample.

Routine Inspection Function

The minimum necessary routine inspections are performed when the system starts up. A software wizard has been adopted for the routine inspections, so that the system can always be used safely.

Sliding Door Finger-Pinch Preventive Mechanism

A finger-pinch preventive mechanism has been provided to prevent pinched fingers when the sliding door is closed.

Collision Sensor

Installed near the X-ray generator, this collision sensor stops the CT stage in an emergency (sample collision).

Door Interlock Mechanism (for X-rays)

Double interlock circuits are provided on the sliding door.
X-ray exposure is impossible when the sliding door is open.

Door Interlock Mechanism (for CT stage)

This stops internal CT stage movement when the sliding door is open.

Standard Specifications

* Appearance and specifications are subject to change without notice.

inspeXio SMX-100CT

inspeXio SMX-100CT

inspeXio SMX-225CT

inspeXio SMX-225CT

inspeXio SMX-90CT

inspeXio SMX-90CT

SMX-1000 Plus/SMX-1000L Plus

SMX-1000 Plus/SMX-1000L Plus

SMX-2000

SMX-2000

News

Saturday, May 23, 2020

Saturday, May 23, 2020

Saturday, May 23, 2020

NEW ARRIVALS/JUST IN: Great Quality Used Equipment

AGILENT 4000 UV-VIS

AGILENT ECLIPSE SYSTEM AGILENT 55AA Atomic Absorption

AGILENT 7500 ICP-MS


Featured items - new!

Used equipment specials

WHY YOU SHOULD CHOOSE TO DO BUSINESS WITH TRIAD SCIENTIFIC

1. EXPERIENCED-We have been building labs, equipping labs, and supplying lab equipment parts and service for over 20 years. With over 100 years of combined lab equipment experience at our site and working with many experienced technicians, we try to offer the right equipment at the right price for you, our partner.

2. SAVE MONEY- We sell, lease, and rent - You save money, 5-70% off original retail, so you get great equipment at a great price.

3. WARRANTY -We offer a warranty on our refurbished equipment and new manufacturer warranty on new equipment.

4. SERVICE- We offer instrument service, refurbishment validations, and calibrations at great rates and skill levels.

5. INSTRUMENT PARTS- We sell new instrument parts and new equipment parts and hard to find used older parts

6. UNIQUE- We are an independent dealer and also sell used instruments, such as AA, FTIR, GC, GC/MS, HPLC, LC/MS, ICP, ICP/MS, Particle Size Analysis, UV/VIS, and UV/VIS/NIR. This equipment is manufactured by companies like Agilent, Hewlett Packard, Waters, Hitachi, Perkin Elmer, Shimadzu, Beckman, and more. WE ARE NOT AFFILIATED WITH THESE COMPANIES IN ANY WAY!

7. BUILD LABS- We well discounted made in USA Lab Casework, Fume hoods, Blowers, Safety Cabinets, and Clean Benches.

8. CASH PAID-Top dollar paid, and you can sell your excess, obsolete, surplus equipment with us. We can buy it or sell on consignment.

9. DIVERSIFIED-We sell a very broad line of new and used Lab Equipment. See our detailed listing above.

CLICHERto join TRIAD SCIENTIFIC'S NEW MAILING LIST and GET SPECIAL LIMITED TIME OFFERS !!!