Call us at 732 292-1994 or 800 867-6690 | Email us at triadscientific@gmail.com | Visite us on
PLANET BEST
Lab Instrumentation
Lab Equipment
Lab Furniture
Yamato GB210 Spray Dryer with a Yamato GAS410 Spray Dry Organic Solvent Collector used
"Easily grinds sample into fine powder with the spray drying system.
This model supports water soluble and organic solvents* (*When organic solvent is used, a GAS410 type organic solvent recovery unit will be necessary). The unique attribute of this spray dryer is its ability to use different glassware sets allowing for a granulation mode." (Yamato)
| Specifications: |
| Performance | Water Evaporation Rate | Max. approx. 1,300 ml/h |
| Temperature Control Range | 40˚C - 220˚C at inlet | |
| Temperature Control Accuracy | ± 1°C at inlet | |
| Dry Air Flow Rate | Max. 0.7 m³/min | |
| Air Spray Pressure Control Range | 0 - 249 k Pa (0-3 kg/cm²) | |
| Flow Rate for Sample Liquid Feed Pump | Max. 26 ml/min | |
| Structure | Temperature Controller | PID digital tempertaure controller |
| Temperature Sensor | K thermocouple | |
| Stainless Tube Heater | 2.88 kW at 240V | |
| Sample Liquid Feeding Pump | Quantitative peristaltic pump | |
| Solvent Recovering Capability | Organic solvent recovery unit GAS-410 must be used | |
| Spray Line Cleaning | Needle inside the nozzle to clean the mesh automatically | |
| Safety Devices | Self-diagnostic functions (e.g. temperature aberration); Sample feed reversal | |
| Standard | Air Spray Pressure Gauge | Bourdon tube: 294k Pa (3 kg/cm²) |
| External Dimensions (W x D x H) | 760 x 420 x 1350 mm or 30 x 16.5 x 53.2 in | |
| Weight | 110 kg or 243 lbs | |
| Power Supply | AC 200V - 240V, single-phase 18 A | |
| Included Accessories | Sample liquid tube | Silicone tube - 2 pcs |
| Safety Cover | Yes | |
| Air hose | 1 pc | |
| Exhaust Duct | 1 pc | |
| Required Accessories | Mini Spray Attachment | GF - 300 or GF - 200 |
| Optional Accessories | Organic Solvent Recovery Unit | GAS - 410 |
| Inlet/outlet Temperature Recorder | 212792 - factory installed | |
| Fine Powder Recovery Cyclone | 212780 | |
| Viton/Tiron Feeding Tube | W0180001 | |
| Nozzle | 1A, 1, 2A, 2, 3 | |
| Operational Requirements | Compressed Air | 28 l/min or 3 kgf/cm²; not required when using GAS-410 |
| Type of Gas | N₂ gas (99.99% purity, medical grade) is required when using GAS-410 |