1000‚°C & 1200‚°C Horizontal and vertical tube furnaces (MTF/CTF/G series)

1000°C & 1200°C Horizontal and vertical tube furnaces

MTF models

• Maximum operating temperatures of 1000°C and 1200°C
• Tube diameters range from 15 - 38mm
• Heated lengths from 130 - 400mm
• These models utilise a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity
• Rapid heat up to operating temperature
• Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals

• The thermocouple is located in a protected position between the outside of the worktube and heating element, allowing the full worktube diameter to be used
• Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
• Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions
• Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
• Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
• For enhanced thermal uniformity, three zone models are available - click below for details
• Click for specification details
• Click for three zone furnace information

CTF models

• Maximum operating temperature of 1200°C
• Tube diameters of 65, 75 and 100mm
• Heated lengths of 550, 700 & 900mm
• These models utilise a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity
• Rapid heat up to operating temperature
• Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals
• The thermocouple is located in a protected position between the outside of the worktube and heating element, allowing the full worktube diameter to be used

• Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
• Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions
• Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
• Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
• For enhanced thermal uniformity, three zone models are available - click below for details
• Click for specification details
• Click for three zone furnace information

GHA models

• Maximum operating temperature of 1200°C
• Accept ube diameters from 19.5 - 150mm id (must be ordered separtely)
• An integral worktube is not fitted and therefore a worktube must be ordered separately
• Existing customer worktubes can be used - however, the outer diameter & length must be specified at the time of ordering
• Seven heated lengths from 300 - 1200mm
• Heating is provided by resistance wire heating elements, semi-embedded in rigidised vacuum formed low thermal mass insulation modules, which when used together with a ceramic worktube ensure excellent thermal uniformity

• Rapid heat up to operating temperature
• Optional removable tube adapters allow rapid changes for different size worktubes
• Can be adapted to allow a non-oxidising atmosphere or vacuum, if required, by fitting an additional worktube and end seals
• Applications in materials research include testing of novel materials under strict temperature & various atmosphere conditions
• Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
• Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
• For enhanced thermal uniformity, three zone models are available
• Click for specification details

GVA models

• Maximum operating temperature of 1200°C
• Accept tube diameters from 19.5 - 150mm id (must be ordered separately)
• An integral worktube is not fitted and therefore a worktube must be ordered separately
• Existing customer worktubes can be used - however, the outer diameter & length must be specified at the time of ordering
• Seven heated lengths from 300 - 1200mm
• Heating is provided by resistance wire heating elements, semi-embedded in rigidised vacuum formed low thermal mass insulation modules, together with a separate ceramic worktube to ensure excellent thermal uniformity
• Rapid heat up to operating temperature

• Removable tube adapters allow rapid changes for different size worktubes
• Can be adapted to allow a non-oxidising atmosphere or vacuum, if required, by fitting an additional worktube and end seals
• This furnace range is supplied with a versatile stand kit, which allows the furnace to be mounted vertically on a stand or wall mounted, or bench mounted horizontally (shown left), all using the separate control box
• Applications in materials research include testing of novel materials under strict temperature & various atmosphere conditions
• Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
• Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
• For enhanced thermal uniformity, three zone models are available
• Click for specification details