Call us at 732 292-1994 or 800 867-6690   |  Email us at triadscientific@gmail.com  |  Visite us on

facebook

PLANET BEST
Lab Instrumentation
Lab Equipment
Lab Furniture

Clearance Sale - Up to 75% off!

Tube Furnaces >> 1000‚°C & 1200‚°C Horizontal and vertical tube furnaces (MTF/CTF/G series)

1000°C & 1200°C Horizontal and vertical tube furnaces


Within this area, there are two furnace types; MTF and CTF models have an integral work tube, while the G range of furnaces is modular and requires a separate work tube.

 

MTF models


  • Maximum operating temperatures of 1000°C and 1200°C
  • Tube diameters range from 15 - 38mm
  • Heated lengths from 130 - 400mm
  • These models utilise a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity
  • Rapid heat up to operating temperature
  • Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals
  • The thermocouple is located in a protected position between the outside of the worktube and heating element, allowing the full worktube diameter to be used
  • Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
  • Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions
  • Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
  • Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
  • For enhanced thermal uniformity, three zone models are available - click below for details
  • Click for specification details
  • Click for three zone furnace information
..........................................................................................................................................................
 

CTF models


  • Maximum operating temperature of 1200°C
  • Tube diameters of 65, 75 and 100mm
  • Heated lengths of 550, 700 & 900mm
  • These models utilise a resistance wire heating element wound around a ceramic worktube, forming an integral part of the heating element to ensure excellent thermal uniformity
  • Rapid heat up to operating temperature
  • Can be adapted to allow a non-oxidising atmosphere or vacuum, by fitting an additional worktube and end seals
  • The thermocouple is located in a protected position between the outside of the worktube and heating element, allowing the full worktube diameter to be used
  • Normally built on the horizontal base pictured left, this furnace range can optionally be mounted vertically with a separate control box
  • Applications in materials research include testing of novel materials under strict temperature and varying atmosphere conditions
  • Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
  • Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
  • For enhanced thermal uniformity, three zone models are available - click below for details
  • Click for specification details
  • Click for three zone furnace information
..........................................................................................................................................................
 

GHA models


  • Maximum operating temperature of 1200°C
  • Accept ube diameters from 19.5 - 150mm id (must be ordered separtely)
  • An integral worktube is not fitted and therefore a worktube must be ordered separately
  • Existing customer worktubes can be used - however, the outer diameter & length must be specified at the time of ordering
  • Seven heated lengths from 300 - 1200mm
  • Heating is provided by resistance wire heating elements, semi-embedded in rigidised vacuum formed low thermal mass insulation modules, which when used together with a ceramic worktube ensure excellent thermal uniformity
  • Rapid heat up to operating temperature
  • Optional removable tube adapters allow rapid changes for different size worktubes
  • Can be adapted to allow a non-oxidising atmosphere or vacuum, if required, by fitting an additional worktube and end seals
  • Applications in materials research include testing of novel materials under strict temperature & various atmosphere conditions
  • Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
  • Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
  • For enhanced thermal uniformity, three zone models are available
  • Click for specification details
..........................................................................................................................................................
 

GVA models


  • Maximum operating temperature of 1200°C
  • Accept tube diameters from 19.5 - 150mm id (must be ordered separately)
  • An integral worktube is not fitted and therefore a worktube must be ordered separately
  • Existing customer worktubes can be used - however, the outer diameter & length must be specified at the time of ordering
  • Seven heated lengths from 300 - 1200mm
  • Heating is provided by resistance wire heating elements, semi-embedded in rigidised vacuum formed low thermal mass insulation modules, together with a separate ceramic worktube to ensure excellent thermal uniformity
  • Rapid heat up to operating temperature
  • Removable tube adapters allow rapid changes for different size worktubes
  • Can be adapted to allow a non-oxidising atmosphere or vacuum, if required, by fitting an additional worktube and end seals
  • This furnace range is supplied with a versatile stand kit, which allows the furnace to be mounted vertically on a stand or wall mounted, or bench mounted horizontally (shown left), all using the separate control box
  • Applications in materials research include testing of novel materials under strict temperature & various atmosphere conditions
  • Applications in the electronics industry include testing electronic components and semiconductor materials under inert atmospheres or vacuum
  • Applications in instrumentation include testing of temperature sensors such as thermocouples and PT100's, which may require enhanced thermal uniformity
  • For enhanced thermal uniformity, three zone models are available
  • Click for specification details

1000‚°C & 1200‚°C Horizontal and vertical tube furnaces (MTF/CTF/G series)

1000‚°C & 1200‚°C Horizontal and vertical tube furnaces (MTF/CTF/G series)

1100‚°C Rotary reactor tube furnaces (HTR)

1100‚°C Rotary reactor tube furnaces (HTR)

1200‚°C Horizontal & vertical split tube furnaces (HST/VST)

1200‚°C Horizontal & vertical split tube furnaces (HST/VST)

1200‚°C Horizontal & vertical split tube three zone furnaces (HZS/TVS)

1200‚°C Horizontal & vertical split tube three zone furnaces (HZS/TVS)

1200‚°C Thermocouple calibration tube furnace (PTC)

1200‚°C Thermocouple calibration tube furnace (PTC)

1200‚°C, 1500‚°C & 1600‚°C Rotating (rotary) tube furnaces

1200‚°C, 1500‚°C & 1600‚°C Rotating (rotary) tube furnaces

1200‚°C, 1500‚°C, 1600‚°C, 1700‚°C & 1800‚°C Three zone tube furnaces (TZF/GHC/GVC)

1200‚°C, 1500‚°C, 1600‚°C, 1700‚°C & 1800‚°C Three zone tube furnaces (TZF/GHC/GVC)

1500‚°C & 1600‚°C Horizontal and vertical tube furnaces (STF)

1500‚°C & 1600‚°C Horizontal and vertical tube furnaces (STF)

1700‚°C & 1800‚°C Horizontal tube furnaces (CTF)

1700‚°C & 1800‚°C Horizontal tube furnaces (CTF)

1700‚°C Vertical split tube furnaces (VST)

1700‚°C Vertical split tube furnaces (VST)

1800‚°C Vertical tube furnaces (PVT)

1800‚°C Vertical tube furnaces (PVT)

‚ Acid Gas Determinator (AGD)

‚ Acid Gas Determinator (AGD)

‚ Carbon-14 & Tritium Analyser (MTT)

‚ Carbon-14 & Tritium Analyser (MTT)

‚ Elevator tube furnace (EVT)

‚ Elevator tube furnace (EVT)

Worktubes, insulation plugs & seals

Worktubes, insulation plugs & seals

News

Friday, July 27, 2018

MASSIVE SALES NOW! 2

1/each BRAND NEW ROTARY JAPANESE QUALITY EVAPORATORS- complete- STARTING AT 2999.99- check back daily
*3 Year Warranty NEW 5 Place Balances
We configure GPC systems- call Bill at 732-558-6170

Wednesday, July 25, 2018

MASSIVE SALES NOW! 1

1/each BRAND NEW ROTARY JAPANESE QUALITY EVAPORATORS- complete- STARTING AT 2999.99- check back daily
*3 Year Warranty NEW 5 Place Balances
We configure GPC systems- call Bill at 732-558-6170

Thursday, July 5, 2018

MASSIVE SALES NOW! 3

1/each BRAND NEW ROTARY JAPANESE QUALITY EVAPORATORS- complete- STARTING AT 2999.99- check back daily
*3 Year Warranty NEW 5 Place Balances
We configure GPC systems- call Bill at 732-558-6170

NEW ARRIVALS/JUST IN: Great Quality Used Equipment

AGILENT 4000 UV-VIS

AGILENT ECLIPSE SYSTEM AGILENT 55AA Atomic Absorption

AGILENT 7500 ICP-MS


Featured items - new!

Used equipment specials

WHY YOU SHOULD CHOOSE TO DO BUSINESS WITH TRIAD SCIENTIFIC

1. EXPERIENCED-We have been building labs, equipping labs, and supplying lab equipment parts and service for over 20 years. With over 100 years of combined lab equipment experience at our site and working with many experienced technicians, we try to offer the right equipment at the right price for you, our partner.

2. SAVE MONEY- We sell, lease, and rent - You save money, 5-70% off original retail, so you get great equipment at a great price.

3. WARRANTY -We offer a warranty on our refurbished equipment and new manufacturer warranty on new equipment.

4. SERVICE- We offer instrument service, refurbishment validations, and calibrations at great rates and skill levels.

5. INSTRUMENT PARTS- We sell new instrument parts and new equipment parts and hard to find used older parts

6. UNIQUE- We are an independent dealer and also sell used instruments, such as AA, FTIR, GC, GC/MS, HPLC, LC/MS, ICP, ICP/MS, Particle Size Analysis, UV/VIS, and UV/VIS/NIR. This equipment is manufactured by companies like Agilent, Hewlett Packard, Waters, Hitachi, Perkin Elmer, Shimadzu, Beckman, and more. WE ARE NOT AFFILIATED WITH THESE COMPANIES IN ANY WAY!

7. BUILD LABS- We well discounted made in USA Lab Casework, Fume hoods, Blowers, Safety Cabinets, and Clean Benches.

8. CASH PAID-Top dollar paid, and you can sell your excess, obsolete, surplus equipment with us. We can buy it or sell on consignment.

9. DIVERSIFIED-We sell a very broad line of new and used Lab Equipment. See our detailed listing above.

CLICHERto join TRIAD SCIENTIFIC'S NEW MAILING LIST and GET SPECIAL LIMITED TIME OFFERS !!!